Français
العربية
Iran
Russian
Spain
EPS Resin Processing of 1
The EPS resin in used for the moulding of EPS products. It is manufactured in the form of very small polystyrene beads with a weight – average molecu...
Sandwich Panel definition
Sandwich panels for building applications are large prefabricated building products.Sandwich panels generally consist of two outer metal sheets (steel...
Properties of sandwich structures
The strength of the composite material is largely dependent on two factors:1.The outer skins: If the sandwich is supported on both sides, and then str...
Expanded Polystyrene Foam (EPF)
Expanded polystyrene foam (EPF) is a plastic material that has special properties due to its structure. Composed of individual cells of low density po...
Concrete Forms
EPS was utilized as buried form for a large concrete abutment (Yoshihara and Kawasaki, 1996). The traditional and alternative method to build such abu...
Compressible Inclusion Against Expansive Soil
Another application for utilizing EPS geofoam is to use it as a compressible inclusion adjacent to a structural element when it is in contact with exp...
Tests of Sandwich Panels
Tests of Sandwich Panelsproperty tests we perform in our labs are most important.Flame Test (vertical). This test indicates how a panel willperform i...
Flying Cut off Panel Lines
Looking to minimize waste, increase production, improve accuracy and extend equipment life? Let's review the benefits of flying cut off units for pane...
Polyethylene Foam
Polyethylene foam offers a diverse range of properties and characteristics, allowing many popular and exciting applications in cushion packaging and o...
Expandable Polystyrene (EPS)
Expandable polystyrene exhibits a number of outstanding properties meeting the needs of a number of general applications including but not necessarily...
Eps resin machinery of 3
Form 4-20 The relation between the coating agent concentration and the preservation period Foaming agent concentration,10-2 Preservation period, h011....
Eps resin machinery of 2
The property of the EPS resin produced by different resin manufacturers is different due to the formula proportion of the raw material, process condit...
Eps resin machinery of 1
Reacting kettleReacting kettle is the main equipment for polymerization and impregnation, as picture 2-4 shows, and it is mainly composed of kettle bo...
Eps resin processing of 12
In fact,the suspension polymerization of the styrene is a bulk polymerization which takes place in the styrene oil layer.The heat that generated from ...
Eps resin processing of 11
5. Abnormity condition and treatment method （1）Polymerization dipping stage ( Table 2-7) Table 2-7 polymerization dipping phase anomalies and processi...
Eps resin processing of 10
（4）In the production and use of resins, may use among products, by-products of people have certain toxicity, for the health, State regulations in the ...
Eps resin processing of 9
3. Material balance4.Safety in production order:The product of styrene Liquefied petroleum gas for the flammable and explosive materials, Resin-assist...
Eps resin processing of 8
2 process flowOne step producion method of expandable polystyrene includes the working procedures of ingredient,impregnation with polymers,aftertreatm...
Eps resin processing of 7
Form 2-4The expandable polystyrene with flame retardant impregnating operation instructionOperation step Operation requirementAdding the expandable po...
Eps resin processing of 6
9.After dissolving by the dissolver 4,the dispersant will be sent into the reactor 9 via the centrifugal pump.While the expandable polystyrene beads w...
Classification part
Top Ranking
Recommended Information
