JOTECHNIK EPS Machines,Shanghai Zhongji Machinery Manufacturing Co.,Ltd.

Home > EPS(Expandable Polystyrene) Production Line >JOTECHNIK EPS Machines

JOTECHNIK EPS Machine

Vertical Block Mold JOBLOCK-H

Descriptions of Vertical Block Mold JOBLOCK-H:
We are currently the only supplier with a complete range of vertical and horizontal block moulds with stepless length and/or height adjustment. All block moulds are equipped with our patented sliding door technology, which make them unbeatable in terms of cycle times. Symmetric media management in conjunction with the possibility of steam chamber purging ensures that you can convince your market of the quality of your blocks and plates.
Our hot-air vacuum will considerably reduce the formation of condensation and the moisture content in the blocks.
Main Technical Specifications of Vertical Block Mold JOBLOCK-H:

Throughput(in EPS blockss per hour) ²⁾
1.0pd/ft3(approx.15g/l)	Approx.16-24
1.2 pd/ft3(approx..20g/l)	Approx.15-21
1.5 pd/ft3(approx..25g/l)	Approx.12-16
Operating voltage	3x400v
Frequency	50Hz
Installed connection power	Approx.55kw
Installed connection power	Approx.75hp
Earthing	Protective multiple earthing
Regulations	VDE
Compressed air supply	Min.6 bar
Compressed air supply	Min.87 psi
Compressed air connection	1/2 "
Pneumatic system	Festo
Steam supply-by customers	Adjustable from 1.5-2.5 bar
Steam supply-by customers	Adjustable from 22-36 psi
Adjustable main steam over	Somas
Cold water supply	4-6 bar
Recommended cold water temperature	<25^。C
Recommended cold water temperature	<77^。C
Control components	Siemens/Beckhoff

Guarantees of Vertical Block Mold JOBLOCK-H:

Compressive stength	100kpa ³⁾
Compressive stength	14.5Psi ³⁾
Bulk density distribution	+/-2.5% ⁴⁾
Residual mositure in EPS block	6 weight% ⁵⁾
EPS block densities	10-40g/l
EPS block densities	0.6-2.5pd/ft ³
Water usage for operation with cold water system	about 15 m³/h
Water usage for operation with cold water system	about 4000 gal/h ¹⁾
Water usage for operation with cold water system	Approx.5m3 for first fill
Water usage for operation with cold water system	Approx.1300 gal for first fill
Water usage for operation with energy recovery	0 m³/h
Water usage for operation with energy recovery	0 gal/h
Steam usage	Approx.6-8kg per m³ of EPS produced
Steam usage	Approx.13-18 pd per 35ft³ of EPS produced
Compressed air usage of the block mold	Approx.3-4 Nm³/h
Block mold	Approx.100-140ft³/h