Phenolic foaming machine


Low-pressure foaming machine is used to measure and mix two different liquid raw materials according to the ratio required by the process.

Main feature:

1.  Material tank

1) Equipped with 2 1000L material tanks, the inner liner is of stainless steel jacket type, the power of the stirring motor is 11KW, which is used for premixing the resin material.

2) Equipped with a 300L material tank, the inner liner is stainless steel jacket type, used for curing agent.

2. Pump set:

1) One metering pump: gear pump, stepless speed regulation, power 5.5KW, explosion-proof motor.

2) One curing agent metering pump, equipped with a hydraulic diaphragm metering pump, power 0.37KW, explosion-proof motor.

3) A cyclopentane feeding pump: equipped with a hydraulic diaphragm metering pump, power 0.37KW, explosion-proof motor.

4) One phenolic resin feeding pump: equipped with a rotor pump, power 3KW, explosion-proof motor.

3. Mixing head set:

1) A set of mechanical mixing head, mixing speed 4500rpm/min, power 2.2KW explosion-proof motor.

2) Equipped with automatic cleaning device (including a 25L cleaning tank, made of stainless steel).

4. Raw material temperature control system:

Equipped with a 5-hp chiller and corresponding water-liquid electric valve, the real number of material temperature is displayed and adjustable, equipped with a heating water tank, and the power is 6KW. The system can realize automatic control of the raw material temperature.

5. Combustible gas monitoring system:

The combustible gas on the foaming system is detected, equipped with 6 combustible gas control and measuring instruments, which can automatically alarm and activate the exhaust system at the same time to effectively discharge the flammable and explosive gas in time.

Equipped with 2 fans, 6 sets of combustible gas detectors and a set of monitors, with corresponding ventilation ducts.
Fan power 4KW 20000m3/h wind pressure 0.3MPa.

6. Electric control cabinet:

The foaming machine adopts PLC control, and the casting calibration time, cleaning time, blowing time and action program can be preset.


Online Message

Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.
Product name: Contacts:
*Tel: *E-mail:
Requirement:
     
Recommend