EPS Automatic Vacuum Block Molding Machine (korea technology)

This Korea technology EPS block molding machine can produce both modified EPS fireproof products and EPS lost mold foam. The whole machine adopts Korean technology and is designed by Korean engineers. All valves are all produced in Europe or Korea.

Main Features:
1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished.
2. Adopt the auto control system on auto weighing and feeding, auto heeting and cooling.
3. Vacuum system mainly includes vacuum storage tank, vacuum cooling tank and efficient water ring vacuum pump and other components.
4 .The machine uses the heating way of top intake, bottom exhaust and cooling way of water spray system.
5. Using high-quality steel and then are welded and heat-treated, sand blasted, shot blasted, the machine is with high strength, no deformation. Block density can reach 6-40kg / m, with high speed, uniform adhesion, low moisture content, the small deformation.
6. Machine cavity is made of stainless steel plate or stainless steel wedge grid structure, with features of energy efficient, easy to disassemble to clean, easy to mold, sheet and good bonding.
7. The machine uses translation mode to open and close the door,with features of nice, fast and efficient way and safe and reliable operation.Eject the block out while the door opened. It is easy to adjust when the mold clamping gap and improve the air tightness of the machine.
8. The machine is equipped with automatic transmission and automatic electronic weighing equipment, printing equipment
9. The machine is also suitable for lost mold EPS block. 10. The machine is designed by South korean engineer, all of the valves are imported from South Korea.

Technical parameters:

No. Item Type/Unit EPSBM6000V/H EPSBM8000V/H
1 Mould Size mm 6120×1230×1050 8110×1240×1040
2 Mould Volume m3 7.96 10.46
3 Product Density/Specific Gravity kg/m3 6-40 6-40
4 Production Capacity block/h 4-12 3-11
5 Steam Pressure Mpa 0.6 0.6
6 Steam Inlet DN mm 150 150
7 Compressed-Air Inlet DN mm 50 65
8 Power Supply Power kw 30 30
Voltage v 380 380
9 Control Mode   Automatic Automatic
10 Structural Features   Hydraulic Sliding-door Vacuum Cooling Hydraulic Sliding-door Vacuum Cooling
11 Control System   PLC with Touch Screen PLC with Touch Screen
12 Max. Outer Dimension Mm 14000×4000×3000 16000×4000×3000
13 Machine Net Weight Tons 17 20
14 Automatic Conveyer   Supplied Supplied
15 Electronic Scale   Supplied Supplied
16 Printer   Optional Optional

Online Message

Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.
Product name: Contacts:
*Tel: *E-mail: