Carriage panel foaming machine

Automatic mixing and dispensing function, program control, reliable performance, simple operation, accurate measurement, even gelatinizing, accurate positioning, automatic operation, automatic completion of the positioning process, can make point, go straight, draw circles, arcs and irregular shapes.

Main feature:
1. Scope of application: This type of glue coating machine is designed for the carriage board with a large coating area.
2. Mainly applicable: RV compartment panels, refrigerated vehicle compartment panels and other car compartment panels.
3. With self-cleaning function, it saves glue consumption and labor cost.
4. Applicable glue: one-component glue (such as: polyurethane glue), the viscosity range is 100 – 20000 mPa.s two-component glue (such as: polyurethane glue), the viscosity range is 100 – 20000 mPa.s 
5. Function introduction: The carriage board laminating and foaming machine is used to accurately measure the single-component glue or two-component glue, and evenly spread it to the surface of the workpiece. According to the characteristics of the glue, it can be equipped with functions such as automatic feeding, automatic heating, automatic cleaning, nitrogen filling protection, and overpressure alarm.
6. Working principle: Since the glue should not be in contact with the air too much, the whole glue circuit is designed as a closed type. The raw material large glue barrel (200L) → chemical automatic feeding pump → main engine intermediate tank → filtration → precision metering → spray coating.
7. Metering method: screw pump, gear pump. Control mode: PLC/motor/touch screen. Input method: touch screen/jog.
8. Suitable process: dispensing, mixing, pouring, pouring, gluing, dispensing, dispensing, potting, automatic quantification. Suitable material: AB glue (polyurethane, PU glue, silicone, epoxy resin).
Technical parameter:



The main function

Longitudinal movement of the two-axis actuator (X axis: the lateral movement of the spray head on the line rail;  Y axis: the upper and lower manual adjustment of the spray head); Built-in automatic glue application program (the glue spray track is determined by the manufacturer, and the workpiece margin can be adjusted Manual setting); The left and right stations are automatically cleaned after gluing; The glue storage bucket has automatic heating function

Power supply

Voltage 380V/220V, 50Hz

Maximum glue output


Coating width range


positioning accuracy


Low pressure foaming machine volume 30L
Automatic cleaning tank volume 18L
Electronic control system Independent control; automatic feeding system; with overcurrent, overload, short circuit protection
Service life Except for wearing parts, the design life of the equipment is ≥ 10 years

Company and service advantages:

1.The company workshop 40,000 square meters, has introduced the first-class multi-station machining center, CNC lathes, CNC milling machines and other high-precision processing equipment. Such as the value of 4.5 million yuan 3mx8m gantry machining center, and the value of 300 million yuan 2.5 mx12m gantry milling machine.

2.The company has a professional The Adjuster team, 24 hours to provide uninterrupted after-sales service.
(1) Installation and debugging
Equipment arrived at the customer workshop, according to the flat layout of our equipment. We will arrange experienced technicians to install, debug and test-produce the equipment, and make the equipment reach the rated production capacity of the production line.
(2) Training
Our company provides technical training for our customers. The training includes the structure and maintenance of the equipment, the control and operation of the equipment, experienced technicians will guide and establish the training program. After training, the buyer's technical personnel can master the operation and maintenance of the equipment, can adjust the process and deal with different failures.

3.After-sales quality problems within 2 hours to answer, if the telephone video guidance can not be solved, domestic 24 hours to send engineers to the site to solve the problem.

4. Factory direct sales price concessions, 40,000 square meters factory, 20 years of Export Enterprises, CE certification, patents more than 50 items.

Online Message

Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.
*Product name: *Your Name:
*E-mail: *Phone/Whatsapp:
*Company Name: *Product Category: