Uncoiler for Upper and Lower & Flexible facing material
Uncoiler is no drive type, and is installed two each at the upper part and the lower part separately.
Uncoiler for Upper and Lower & Flexible facing material
Uncoiler is no drive type, and is installed two each at the upper part and the lower part separately.
Main feature:
1. Uncoiler is no drive type, and is installed two each at the upper part and the lower part separately.
2. It is very difficult for the flexible facing such as paper, mineral shear non woven, aluminum foil differently on steel plate to entry into a double belt conveyor when it is untied from uncoiler.So, auto tension control device should be installed to uncoiler.
3. The lower & upper uncoiler should be installed at the bottom.
4. It is better to installing the uncoiler close to the inlet for pouring urethane as close as possible.
5. Type : Non drive and pneumatic expansion shaft type which are installed auto centering device and tension device.
6. Quantity:Total 2 sets
- Upper parts:1 set
- Lower parts:1 set
7. Max width of uncoiler:Max. 1,400mm
8. Width adjustable by manual:210~1,220mm (by handle)
9. Dimension : Inner dia. 150mm x out dia. 900mm
- Consist of:Pneumatic expansion shaft
Pneumatic Power disk brake
Auto Tension device
10. Max. weight of material:1,000kg
11. Max. speed:8m/min
Flexible facing:
Facing materials |
Soda kraft paper, Aluminum foil, |
Panel thickness | 20~50mm |
Panel width | 1,200mm |
Online Message
Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.