Roll forming machine

The roll forming machine consists of an upper roll forming machine and a lower roll forming machine. The upper roll forming machine is suspended above the production line and consists of two sets of forming rollers, a set of guide devices.

Technical parameters:
Roller station 
1)Cold room 9 stations
2) Roof   18 stations
Forming roll
1)Material SCM-21
2)Surface of roll Hard chromium coated
Main motor power 7.5kw
Linear speed range 0-14m/min
Material of roller 45# steel
Final width    1,000mm- Fixed type
Thickness of steel panel 0.4-0.7mm
Diameter of roller shaft φ50 ~70mm
Specification of drive sprocket 1 inch
Transmission device Pin wheel cycloid reduction box
Forming roll
Material SCM-21
Surface of roll Hard chromium coated

Online Message

Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.
Product name: Contacts:
*Tel: *E-mail: